The NOxGen 3 allows instrument operators and manufacturers to check the converter efficiency of their Chemiluminescent NOx analyser. The unit is controlled by using two decade thumbwheel switches adjustable from 00 to 99, and a three position ozone level switch for low, medium and high settings. The NOxGen 3 R provides the option of remote control using TTL levels for all operational functions. It comes in a 19” rack type, 3 units high enclosure. It can be bench top used or fitted into a 19” rack console. For bench top use there are extendible feet at the front which can be used to tilt the angle of the instrument back for ease.
Price on Quotation
• Suitable for all types of Chemiluminescent NOx analysers
• Compact design
• NO2 gas not required
• Simple setting to generate NO2 concentrations
• Built-in Ozone generator
• High stability against main power variations
| AdBlue/Urea injection control
Ammonia Slip Automotive Biomass combustion monitoring Boiler and Combustion Performance Boiler/stove emissions compliance Calibration/Audit Combustion efficiency Combustion emissions monitoring Combustion research Compliance monitoring Container leakage control/monitoring Continuous emissions monitoring (CEM) Denox Engine Exhaust Fertiliser process control/monitoring |
Flue gas emissions monitoring
Gas purity Greenhouse gas (GHG) measurement Linearity Checking NOx converter efficiency testing NOx emissions monitoring Process control Process Emission Monitoring Refrigerant measurement Scrubber efficiency SNCR – Selective Non-catalytic Reduction Source emissions Specialist Research Toxic Gas Measurement Vehicle emissions
|
GAS SUPPLY REQUIREMENTS: Nitric oxide in nitrogen, oxygen or dry air
SPAN GAS FLOW RATE: 6 l/min
POWER: 230V 50Hz
FITTINGS: 1/4” stainless steel
WEIGHT: 6.6kg
DIMENSIONS: 280mmW x 175mmH x 245mmD. 3U high, suitable for 19” rack mounting
ADDITIONAL NO FROM N2: Less than 0.5ppm when air is used for oxygen supply
There are two main options for gas analysis in industrial processes or emissions; the analyser can be located inside the gas stream (in-situ), or a
In order to demonstrate compliance with environmental regulations, LANXESS, a leading specialty chemicals company, has been using Signal Group Flame Ionisation detectors (FIDs) at its
![SOLAR tablet[1]](https://www.signal-group.com/wp-content/uploads/2022/07/SOLAR-tablet1-600x380.jpg "SOLAR tablet[1]")
Signal Group, the UK developer and manufacturer of advanced gas analysis and calibration instrumentation, has submitted both portable and fixed VOC analysers for MCERTS
Company Registration Number 01369865 • Vat Number GB296290719
