Research
Monitoring...

3000HM
Heated THC Analyser
The Model 3000HM has full automatic microprocessor operation with Auto Start-up, Ignition, Calibration and Range Change.



Key Benefits:
• Fast speed of Response
• Built-in catalytic air purifier
• 0-4ppm to 10,000 ppm (8 ranges)
• Electronic Temperature & Pressure Transducers
• 110/240v AC 50/60 Hz switchable
• 2 year warranty

Applications:
• Environmental  compliance
• Combustion analysis
• Process monitoring
• Automotive exhaust emissions

mcerts certificate

Data sheet 3000HM

Back to top

 

4000VM
Heated Vacuum CLD NOx Analyser
The Model 4000VM Chemiluminescent has full automatic microprocessor operation with Auto Start-up, Calibration and Range Change.


Key Benefits:
• Fast speed of Response
• Cooled  PM Detector, Heated Reaction Chamber
• Dry vacuum pump
• 0-4ppm to 10,000 ppm (8 ranges)
• Electronic Temperature & Pressure Transducers
• 110/240v AC 50/60 Hz switchable
• 2 year warranty

Applications:
• Environmental  compliance
• Combustion analysis
• Process monitoring
• Automotive exhaust emissions

Data sheet 4000VM

 

Back to top

 

 

 

Copyright Signal Group Ltd.
All rights reserved

 

418 Dual Beam
Infra-red Gas Analyser
The Model 418 Luft analyser uses non-dispersive infrared gas analysis, an established technique for the quantative determination of gases and vapours possessing heteroatomic molecules.

The method has the advantages of being continuous and selective, as well as leaving the sample unaffected. It offers a wide range of sensitivity, and is free from hysteresis and poisoning effects.

The double beam analysers in the Signal 418 series offer a range of general purpose instruments, ideally suited to a wide range of applications wherever a high degree of selectivity is required.

The gas sensitised detector employed ensures good sensitivity and enables a wide range of gases and vapours to be measured.

Key Benefits:
• High sensitivity gas filled detectors
• Wide range of gas species and ranges
• Stable, selective measurements
• Linearised signal outputs
• Fast response
• Continuous operation
• Does not affect sample gas
• Microprocessor controlled electronics
• Compact 4U high 19" Rack Enclosure
• 0-10ppm to 10,000 ppm (4 ranges)
• LCD Display
• 110/240v AC 50/60 Hz 
• Proven reliability
• Wide range of ancilliary options

Data sheet 418

 

Back to top

 

 

 

 

7000FM GFC
Infra red Analyser
The 7000FM Series of analysers offer a range of high performance instruments suitable for applications where high sensitivity is required.


Key Benefits:
• Fast speed of Response
• Solid state detector
• Multirange single or dual cell
• Paged diagnostics
• Electronic Temperature & Pressure Transducers
• 110/240v AC 50/60 Hz switchable
• 2 year warranty

Data sheet 7000FM

 

9000MGA
Multi Gas Analyser
The 9000MGA is a Series III microprocessor-based gas analyser featuring gas filter correlation infrared measurement and a paramagnetic oxygen module.

Up to three gases may be measured in a single 3 RU high standard Series III instrument case.


High and low concentration analysers employ a unique dual length optical path for drift-free, linear operation.


Key Benefits:
• Dual or Triple channel
• Fast  speed of Response
• 3 Ranges plus Autorange per channel
• Electronic Temperature & Pressure Transducers
• RS232  'AK' Protocol, 4-20mA & 0-10Vdc Chart outputs
• Paged  Diagnostics
• 110/240v AC 50/60 Hz switchable
• 2 year warranty

Applications:
• Environmental  compliance
• Combustion analysis
• Process monitoring
• Gas Turbine Emissions
• Automotive  Emissions
• Research

Data sheet 9000MGA

  MGA Brochure

 

Back to top

 

Signal produces a full range of CEMs and emission monitoring support equipment for

environmental compliance and process monitoring applications.