7000FM GFC
Infra-red Analyser
The 7000FM Series of analysers offer a range of high performance instruments suitable for applications where high sensitivity is required.
Key Benefits:
• Fast speed of Response
• Solid state detector
• Multirange single or dual cell
• Paged diagnostics
• Electronic Temperature & Pressure Transducers
• 110/240v AC 50/60 Hz switchable
• 2 year warranty
7000FM
9000MGA
Multi Gas Analyser
The 9000MGA is a Series III microprocessor-based gas analyzer featuring gas filter correlation infrared measurement and a paramagnetic oxygen module.
Up to three gases may be measured in a single 3U high standard Series III instrument case.
High and low concentration analyzers employ a unique dual length optical path for drift-free, linear operation.
Key Benefits:
• Dual or Triple channel
• Fast speed of Response
• 3 Ranges plus Autorange per channel
• Electronic Temperature & Pressure Transducers
• RS232 'AK' Protocol, 4-20mA & 0-10Vdc Chart outputs
• Paged Diagnostics
• 110/240v AC 50/60 Hz switchable
• 2 year warranty
Applications:
• Environmental compliance
• Combustion analysis
• Process monitoring
• Gas Turbine Emissions
• Automotive Emissions
• Research
9000MGA
Copyright Signal Group Ltd.
All rights reserved
526
Methane/ Non-Methane Hydrocarbon Analyser
The 526 Methane/ Non-Methane Hydrocarbon Analyser analyser is designed for measurement of methane and non-methane hydrocarbons in ambient air applications. Sample system
Key Benefits:
• Separate methane/ non-methane outputs
• High sensitivity
• Excellent stability
• Choice of scrubber types
• Flexible outputs and alarms
• Low maintenance
Applications:
• Environmental compliance
• Combustion analysis
• Process monitoring
• Automotive exhaust emissions
320 Non-Methane Cutter
An external non-methane hydrocarbon cutter providing capability to measure methane with a standard heated flame ionisation detector (FID).
The Model 320 provides a low cost alternative to “all in one” FIDs with a built in cutter.
Key Benefits:
• Fully heated converter chamber
• 316 stainless steel gas contact materials
• Factory preset chamber temperature
• PID controlled emperature
• Gas connections: Stainless steel 1⁄4”
• Filter type: Stainless steel sintered disk
• Average filter pore size: 100 micron
• Changeover valve: Heated ball valve
• Max inlet THC concentration: 2000ppm
• Power: 240 Vac (650W)
• Weight: 6Kg
3000MO
Heated FID Methane Only Analyser
The Model 3000MO methane only analyser is designed for use with a standard Model 3000HM, or any other total hydrocarbon analyser, to allow the derivation of a value for non methane hydrocarbons. In order to do this a reading must be taken for the concentration of methane and subtracted from the total hydrocarbon reading to derive a value for the hydrocarbons excluding methane.
Key Benefits:
• High cutter efficiency
• Measuring range 0-4ppm up to 0-1000ppm methane
• Fast response
• Reference method for measuring THC
• 2 year warranty
Applications:
• Environmental compliance
• Combustion analysis
• Process monitoring
• Automotive exhaust emissions
3000MO