3000HM
Heated THC Analyser
The Model 3000HM has full automatic microprocessor operation with Auto
Start-up, Ignition, Calibration and Range Change.
Key Benefits:
• Fast speed of Response
• Built-in catalytic air purifier
• 0-4ppm to 10,000 ppm (8 ranges)
• Electronic Temperature & Pressure Transducers
• 110/240v AC 50/60 Hz switchable
• 2 year warranty
Applications:
• Environmental compliance
• Combustion analysis
• Process monitoring
• Automotive exhaust emissions
320 Non-Methane Cutter
An external non-methane hydrocarbon cutter providing capability to measure methane with a standard heated flame ionisation detector (FID).
The Model 320 provides a low cost alternative to “all in one” FIDs with a built in cutter.
Key Benefits:
• Fully heated converter chamber
• 316 stainless steel gas contact materials
• Factory preset chamber temperature
• PID controlled temperature
• Gas connections: Stainless steel 1⁄4”
• Filter type: Stainless steel sintered disk
• Average filter pore size: 100 micron
• Changeover valve: Heated ball valve
• Max inlet THC concentration: 2000ppm
• Power: 240 Vac (650W)
• Weight: 6Kg
Copyright Signal Group Ltd.
All rights reserved
3010 MINIFID
Portable Heated THC Analyser
The 3010 MINIFID is a small, self contained, and fully portable analyser. It is equally convenient for use on the laboratory bench or as a portable on-site measurement tool.
This three-gas FID features the same detection as the 3000HM and 3030PM. Comes with a 5m heated sample line and built-in controller. Manual operation without microprocessor control.
Bottle rack may be detached for use with standard, full sized gas cylinders.
Key Benefits:
• Fast speed of Response
• Built-in catalytic air purifier
• 0-10ppm to 10,000 ppm (4 ranges)
• High Range option 0-10%
• 110v AC 50/60 Hz
• Built in Heated Line Controller (5m or 10m line option)
• 2 year warranty
Applications:
• VOC
• Solvent incineration and absorption
• Coating applications, paint spray booths etc.
• Gas Turbines
3030PM
Portable Heated THC Analyzer
A true, three-gas FID with the powerful microprocessor features of the 3000HM, built-in catalytic combustion air supply and zero air generator, 5m heated sample line and controller in a 15kg package. Non-Methane option is available.
3000MO
Heated Methane Only Analyser
The Model 3000MO methane only analyser is designed for use with a standard Model 3000HM, or any other total hydrocarbon analyser, to allow the derivation of a value for non methane hydrocarbons.
In order to do this a reading must be taken for the concentration of methane and subtracted from the total hydrocarbon reading to derive a value for the hydrocarbons excluding methane.
Key Benefits:
• High cutter efficiency
• Measuring range 0-4ppm up to 0-1000ppm methane
• Fast response
• Reference method for measuring THC
• 2 year warranty
Applications:
• Environmental compliance
• Combustion analysis
• Process monitoring
• Automotive exhaust emissions
526
Methane/ Non-Methane Hydrocarbon Analyser
The 526 Methane/ Non-Methane Hydrocarbon Analyser analyser is designed for measurement of methane and non-methane hydrocarbons in ambient air applications. Sample system
Key Benefits:
• Separate methane/ non-methane outputs
• High sensitivity
• Excellent stability
• Choice of scrubber types
• Flexible outputs and alarms
• Low maintenance
Applications:
• Environmental compliance
• Combustion analysis
• Process monitoring
• Automotive exhaust emissions
