7200FM GFC
Infra-red Analyser
The 7200FM CO2 analyser is a high performance instrument suitable for applications where high sensitivity is required.
Key Benefits:
• Fast speed of Response
• Multirange single or dual cell
• Paged diagnostics
• Electronic Temperature & Pressure Transducers
• 110/240v AC 50/60 Hz switchable
• 2 year warranty
7200FM
7000SB
Infra-red Analyser
The single beam analysers in the Signal 7000 series offer a range of general purpose instruments suitable for all applications where high sensitivity is not required but reliable readings are essential.
Key Benefits:
• Fast speed of Response
• Single or Dual Analysis Cells
• Electronic Temperature & Pressure Transducers
• 110/240v AC 50/60 Hz switchable
• 2 year warranty
Applications:
• Environmental compliance
• Combustion analysis
• Process monitoring
• Research & Development
7000SB
Copyright Signal Group Ltd.
All rights reserved
418 Dual Beam
Infra-red Gas Analyser
The Model 418 Luft analyser uses non-dispersive infrared gas analysis, an established technique for the quantative determination of gases and vapours possessing heteroatomic molecules.
The method has the advantages of being continuous and selective, as well as leaving the sample unaffected. It offers a wide range of sensitivity, and is free from hysteresis and poisoning effects.
The double beam analysers in the Signal 418 series offer a range of general purpose instruments, ideally suited to a wide range of applications wherever a high degree of selectivity is required. The gas sensitised detector employed ensures good sensitivity and enables a wide range of gases and vapours to be measured.
Key Benefits:
• High sensitivity gas filled detectors
• Wide range of gas species and ranges
• Stable, selective measurements
• Linearised signal outputs
• Fast response
• Continuous operation
• Does not affect sample gas
• Microprocessor controlled electronics
• Compact 4U high 19" Rack Enclosure
• 0-10ppm to 10,000 ppm (4 ranges)
• LCD Display
• 110/240v AC 50/60 Hz
• Proven reliability
• Wide range of ancilliary options
9000MGA
Multi Gas Analyser
The 9000MGA is a Series III microprocessor-based gas analyzer featuring gas filter correlation infrared measurement and a paramagnetic oxygen module.
Up to three gases may be measured in a single 3U high standard Series III instrument case.
High and low concentration analyzers employ a unique dual length optical path for drift-free, linear operation.
Key Benefits:
• Dual or Triple channel
• Fast speed of Response
• 3 Ranges plus Autorange per channel
• Electronic Temperature & Pressure Transducers
• RS232 'AK' Protocol, 4-20mA & 0-10Vdc Chart outputs
• Paged Diagnostics
• 110/240v AC 50/60 Hz switchable
• 2 year warranty
Applications:
• Environmental compliance
• Combustion analysis
• Process monitoring
• Gas Turbine Emissions
• Automotive Emissions
• Research
9000MGA
